E 350 V10-6.8L (2007)
8. Remove the safety belt retractor (extended wagon).
1. Remove the safety belt guide.
2. Using the special tool, remove the bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
3. Remove the safety belt retractor.
9. Remove the upper rear body side trim panel.
1. Remove the pushpins.
2. Remove the upper rear trim panel.
10. Remove the upper front body side trim panel.
1. Remove the screw.
2. Remove the upper front trim panel.
11. Remove the lower rear body side trim panel (extended wagon).