E 350 V10-6.8L (2007)
Seat Cushion: Removal and Replacement
Seat Cushion - Front
Removal and Installation
WARNING: Never probe the electrical connectors on safety belt buckle/retractor pretensioners or adaptive load limiting retractors. Failure to follow
this instruction may result in the accidental deployment of the safety belt pretensioners or adaptive load limiting retractors, which increases the risk of
serious personal injury or death.
WARNING: To reduce the risk of accidental deployment, do not use any memory saver devices. Failure to follow this instruction may result in
serious personal injury or death.
NOTE: The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON.
NOTE: The supplemental restraint system (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
All seats
1. Remove the seat. For additional information,
Seats with lumbar
2. NOTE: Make sure the lumbar is adjusted to the fully relaxed position before removal.
Pull and remove the lumbar adjust knob.
3. Remove the side shield screw behind the lumbar adjust knob.
Seats with a cushion inboard side shield
