E 350 V10-6.8L (2007)
9. Remove the 4 LATCH forward attachment bolts and the LATCH attachment.
-
To install, tighten to 13 Nm (10 lb-ft).
10. Remove the rear seat cushion cover.
1. Pull the safety belt ends up through the rear seat cushion cover and the rear seat cushion pad.
2. Peel the rear seat cushion cover from the rear seat cushion pad.
11. To assemble, reverse the disassembly procedure.
-
Make sure the safety belts and buckles are accessible to the occupants after installation.
12. Install the rear bench seat backrest.
13. Install the rear bench seat assembly.
