E 350 V10-6.8L (2007)
5. NOTE: On the RH side seat only, make sure the seat track is in the full rearward position to access the front seat track bolts.
Remove the seat track bolts and remove the seat track assembly.
-
To install, tighten to 25 Nm (18 lb-ft).
6. Remove the safety belt buckle end assembly.
1. Remove the safety belt buckle end bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
2
Remove the safety belt buckle end.
7. If LH seat, remove the cushion support bracket bolts and the cushion support from the seat cushion frame.
-
To install, tighten to 25 Nm (18 lb-ft).
8. To install, reverse the removal procedure.
-
Make sure the safety belts and buckles are accessible to the occupants after installation.
