E 350 V10-6.8L (2007)
Connecting Rod Bend
1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement
is within specification.
^
If out of specification, install new components as necessary.
Connecting Rod Twist
1. Measure the connecting rod twist on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the measurement is
within specification.
^
If out of specification, install new components as necessary.
Connecting Rod-to-Piston Clearance
1. Measure the clearance between the connecting rod and the piston. Verify the measurement is within specification.
^
If out of specification, install new components as necessary.
Connecting Rod Bearing Journal-to-Bearing Clearance