Valve Spring Inspection: Cylinder Head Assembly for E 350 V10-68L Engine (2007)
Valve Spring: Service and Repair
Valve Springs
Valve Springs
Special Tool(s)
Material
Removal and Installation
1. If servicing the RH cylinder valvetrain components, remove the RH valve cover.
2. If servicing the LH cylinder valvetrain components, remove the LH valve cover.
3. Position the piston of the cylinder being serviced at the bottom of the stroke.
4. Install the special tool between the valve spring coils to protect the valve stem seal from damage.
5. NOTE: The camshaft roller followers must be installed in their original locations. Record the camshaft roller follower locations.
Use the special tool to compress the valve spring and remove the camshaft roller follower.
