E 350 V10-6.8L (2007)
5. Install the timing chain guides and the 4 bolts.
^
Tighten to 10 Nm (89 inch lbs).
6. NOTE: Slightly loosen the Camshaft Holding Tool to allow slight camshaft movement.
Preposition the camshafts.
1
Rotate the LH camshaft with the Camshaft Positioning Tool until the timing mark is approximately at 12 o'clock.
2
Rotate the RH camshaft with the Camshaft Positioning Tool until the timing mark is approximately at 11 o'clock.
^
Tighten the Camshaft Holding Tool to maintain camshaft prepositioning.
