E 350 V10-6.8L (2007)
10. NOTE: Be sure the upper half of the timing chain is below the tensioner guide dowel. If necessary, use the Camshaft Positioning Tool to adjust.
Install the LH timing chain on the camshaft sprocket with the 2 chain (marked) links and the timing marks aligned.
11. CAUTION: The camshaft sprocket can jump time if the Camshaft Holding Tool is not secured.
NOTE: Be sure the chain link and crankshaft sprocket timing marks are aligned.
NOTE: The lower half of the timing chain must be positioned above the dowel.
Install the RH (outer) timing chain on the crankshaft sprocket.
12. Position the timing chain on the camshaft sprocket. Make sure the 2 copper-colored (marked) links align with the camshaft sprocket timing mark.
13. NOTE: The LH timing chain tensioner arm has a bump near the dowel hole, for identification.
