E 350 V10-6.8L (2007)
13. Position the belt idler pulley and install the bolt.
^
Tighten to 25 Nm (18 ft. lbs).
14. NOTE: RH shown, LH similar.
Install the radio frequency interference capacitors and the 2 nuts.
^
Tighten to 25 Nm (18 ft. lbs).
15. Position the A/C compressor and install the 3 bolts.
^
Tighten to 25 Nm (18 ft. lbs).
16. Connect the CKP sensor electrical connector.