E 350 V10-6.8L (2007)
Install the A/C clutch field coil.
1
Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector correctly positioned.
2
Place the special tool on the A/C clutch field coil.
3
Place special tool 412-065 on special tool 412-078.
4
Use the special tool to install the A/C clutch field coil.
4. Install the A/C compressor pulley.
5. Install the A/C compressor pulley snap ring.
6. Install the A/C clutch disc and hub spacer(s) and the A/C clutch disc and hub.
7. Install the A/C clutch disc and hub bolt.
1
Hold the A/C clutch disc and hub with the special tool.
2
Tighten to 13 Nm (10 lb-ft).
8. Measure and adjust the clutch air gap by adding or removing A/C clutch disc and hub spacers.
9. Install the A/C compressor.