E 350 V10-6.8L (2007)
Compass: Adjustments
Compass Zone Adjustment
COMPASS ZONE ADJUSTMENT
Compass Calibration Zone Map
1. Refer to the compass calibration zone map to select the correct compass zone setting for the geographic location of the vehicle. See: Compass
Calibration
2. Press and hold the SELECT button (approximately 3 seconds) until VAR appears on the display. Release the SELECT button.
3. NOTE: The compass exits the VAR mode if the SELECT button has not been pressed after a period of approximately 5 seconds.
Momentarily press and release the SELECT button to increase the zone increment by 1. Set the zone display number to match the vehicle
geographical location on the compass calibration zone map.
