ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8547 > < Initial Inspection and Diagnostic Overview|Page 8545
Page 3
background image

A9-A10

Normal Operation

The compass receives battery voltage from the central junction box (CJB) through circuit 137 (YE/BK). Ground for the compass is provided by circuit
875 (BK/LB). The display is backlit only when the headlamp switch is in the PARK or in the HEADLAMPS ON positions.

The compass and ambient air temperature display can be turned off and on by pressing the SELECT switch in the overhead console. The vehicle
heading is displayed as N, NE, E, SE, S, SW, W, or NW.

Possible Causes

-

Fuse

-

Circuit 137 (YE/BK) open or short to ground

-

Circuit 875 (BK/LB) open

-

Compass zone setting

-

Compass calibration

-

Vehicle magnetization

-

Compass display

Test B: The Outside Air Temperature Is Inaccurate / Inoperative

PINPOINT TEST B: THE OUTSIDE AIR TEMPERATURE IS INACCURATE/INOPERATIVE

Initial Inspection and Diagnostic Overview|Page 8547 > < Initial Inspection and Diagnostic Overview|Page 8545