E 350 V10-6.8L (2007)
Midship Fuel Tank (Part 2)
Exploded View
Removal and Installation
1. Remove the fuel tank.
2. CAUTION: The fuel vapor vent valve must be disengaged from the fuel tank before it can be removed. While pressing down, rotate the
fuel vapor vent valve counterclockwise to disengage from the fuel tank. Failure to do so can cause damage to the fuel vapor vent valve or
the fuel tank.
Remove the fuel vapor grade vent valves.
1
Disconnect the fuel vapor tubes quick connect couplings from the fuel vapor grade vent valves.
2
Press down and rotate the fuel vapor grade vent valves counterclockwise and remove from the fuel tank.
3. To install, reverse the removal procedure.
-
Carry out the evaporative emission system leak test. See: Testing and Inspection/Evaporative Emission System Leak Test
-
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Evaporative Emission Repair Verification
Drive Cycle
