E 350 V10-6.8L (2007)
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of
the power steering components may result.
1. Compress the clamp and disconnect the steering gear-to-fluid cooler return hose from the cooler.
2. Disconnect the power steering return hose-to-steering gear fitting.
^
To install, tighten to 20 Nm (15 ft. lbs.)
3. To install, reverse the removal procedure.
4. Fill and leak check the system.
