E 350 V10-6.8L (2007)
10. Remove the RH lower instrument panel reinforcement.
11. Disconnect the passenger air bag module electrical connector.
12. Attach restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
13. Install the RCM fuse 20 (10A) to the CJB.
14. Connect the battery ground cable.
Reactivation Procedure
1. Remove the RCM fuse 20 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Remove restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
