E 350 V10-6.8L (2007)
Extension Housing: All Technical Service Bulletins
A/T - Extension Housing Seal Fluid Leaks
TSB 07-22-9
11/12/07
EXTENSION HOUSING BEARING SPIN-OUT - FLUID
LEAK FROM EXTENSION HOUSING SEAL - BUILT
BEFORE 10/19/2007
FORD:
2007-2008 E-150, E-250, E-350
This article supersedes TSB 07-20-2 to add a production fix date.
ISSUE
Some 2007 and 2008 E-Series 150-350 vehicles built before 10/19/2007 and equipped with 4R75E transmissions may exhibit a fluid leak at the
transmission extension housing bushing. These leaks are primarily on vehicles driven at sustained higher speeds, near maximum load and high ambient
temperatures.
ACTION
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
1.
If the extension housing bushing and seal are still in their original position, replace only the seal for the leak. Follow Workshop Manual (WSM),
Section 307-01A
2.
If the extension housing bushing and/or seal have moved, replace the extension housing assembly with an updated version which has higher
bushing retention and lubrication qualities. Follow the WSM, Section 307-01A.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
072209A
2007-2008 E-150/250/350
0.6 Hr.
With 4R75E : Replace
Extension Housing Seal,
Includes Time For
inspections, Check and Fill
Transmission Fluid (Do Not
Use With 7052A)
072209B
2007-2008 E-150/250/350
1.1 Hrs.
With 4R75: Replace
Extension Housing,
Includes Time For
inspections, Check and Fill
Transmission Fluid (Do Not
Use With 7052A)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7A041
69