E 350 V10-6.8L (2007)
4. Do not remove the fluid filter. It is not necessary to change the fluid filter during a normal maintenance fluid change.
5. Clean and inspect the transmission fluid pan, transmission fluid pan gasket and magnet.
6. Thoroughly flush the cooler tubes. For additional information, refer to Transmission Fluid Cooler - Backflushing and Cleaning.
Refill
7. Position the magnet into the transmission fluid pan.
8. NOTE: The fluid pan gasket is reusable. Clean and inspect for damage. If not damaged, the gasket should be reused.
Install the fluid pan and gasket.
1
Position the fluid pan with the gasket in place.
2
Install the bolts.
^
Tighten to 14 Nm (10 ft. lbs.)
9. CAUTION: The use of any other transmission fluid can result in the transmission failing to operate in a normal manner or transmission
