E 350 V10-6.8L (2007)
9. Remove the extension housing and gasket.
1
Remove the bolts and nuts.
2
Remove the extension housing and gasket.
Installation
1. Install the extension housing and gasket.
1
Install the extension housing and gasket.
2
Install the bolts.
^
Tighten to 27 Nm (20 ft. lbs.)
2. Install the insulator and retainer and install the bolts.
^
Tighten to 90 Nm (66 ft. lbs.)
3. Lower the transmission onto the rear crossmember and tighten the insulator and retainer nuts.
^
Tighten to 90 Nm (66 ft. lbs.)
