E 350 V10-6.8L (2007)
2
Install the actuating cable end onto the actuating lever and install the pin.
3
Install the hair pin retaining clip into the pin.
4
Connect the return spring to the pin.
All vehicles
7. Install the driveshaft.
Extension Housing Gasket
Extension Housing Gasket
Special Tool(s)
Material
Removal
All vehicles
1. Remove the driveshaft.
Vehicles equipped with a transmission-mounted parking brake
2. Disconnect the transmission-mounted parking brake linkage.
1
Disconnect the return spring from the pin.
2
Remove the hair pin retaining clip from the pin.
3
Remove the pin from the actuating lever and move the actuating cable away from the actuating lever.
4
Compress the spring on the actuating cable and remove the cable out of the cable housing.
