E 350 V10-6.8L (2007)
^
Tighten to 48 Nm (35 ft. lbs.)
Vehicles equipped with a fixed flange
3. Install the extension housing bolts.
^
Tighten to 48 Nm (35 ft. lbs.)
4. Using the special tool, install a new output shaft retaining nut.
^
Tighten to 200 Nm (148 ft. lbs.)
5. Install the output shaft flange and a new bolt.
^
Tighten to 130 Nm (96 ft. lbs.)
All vehicles
6. Connect the output shaft speed (OSS) sensor electrical connector.
