E 350 V10-6.8L (2007)
Installation
1. Loosely install the digital TR sensor bolts and sensor.
2. NOTE: The manual shift lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
3. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Tighten the digital TR sensor bolts.
^
Tighten to 9 Nm (80 inch lbs.)
4. Install the manual control lever.
1
Position the manual control lever.
2
Install a new manual control lever nut.
^
Tighten to 33 Nm (24 ft. lbs.)
