E 350 V10-6.8L (2007)
Differential Carrier: Service and Repair
Differential Carrier - Dana 70
Differential Carrier - Dana 70
Special Tool(s)
Material
1. Raise the vehicle on a hoist or raise the rear end of the vehicle with a jack. Install safety stands under the frame rails and lower the jack or hoist
enough to allow the rear axle to drop into the rebound position for working clearance.
For additional information, refer to Maintenance/Service and Repair.
2. Remove the differential housing cover and drain the lubricant.
^
Clean the gasket material from the differential housing cover and the differential housing.
