E 350 V10-6.8L (2007)
Drive/Propeller Shaft: Service and Repair
Driveshaft - Rear, One-Piece
Driveshaft - Rear, One-Piece
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. To maintain driveline balance, index-mark the driveshaft flange yoke and the pinion flange.
3. CAUTION: Do not allow the output shaft to turn.
Index-mark the driveshaft yoke and the transmission tailshaft.
4. Remove the 4 driveshaft-to-pinion flange bolts.
