E 350 V10-6.8L (2007)
Universal Joint: Service and Repair
Driveshaft Universal Joint - Single Cardan, Flange Yoke
Driveshaft Universal Joint - Single Cardan, Flange Yoke
Special Tool(s)
Disassembly
Initial disassembly
1. CAUTION: Do not, under any circumstance, clamp the driveshaft in the jaws of a vise or similar holding fixture. Denting or localizing
fracture can result, causing driveshaft failure during vehicle operation.
Place the driveshaft on a suitable workbench. Do not damage the tube.
2. NOTE: If components are not marked and installed incorrectly, driveline imbalance can occur.
Index-mark the driveshaft components.
3. Remove and discard the 4 snap rings.
4. Clamp the special tool in a vise.