E 350 V10-6.8L (2007)
Shift Solenoid: Service and Repair
Line Pressure Control Solenoid - PC-A
Torqshift Automatic Transmission
Line Pressure Control Solenoid - PC-A
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the transmission main control valve body.
3. Remove the solenoid body electrical connector O-ring seal.
4. Partially remove the solenoid body electrical wire harness.
1
Remove the wire harness-to-solenoid body bolts.
2
Disconnect the electrical connector from the pressure control solenoid (PC-A) and the shift solenoid (SSPC-C)
3
Lift the tab on the bulkhead connector, twist and push the bulkhead connector through the solenoid body.