E 350 V10-6.8L VIN S (2006)
Hood Latch: Service and Repair
Hood Latch
HOOD LATCH
Removal and Installation
1. Remove the pin-type retainers and the radiator sight shield.
2. Remove the bolts and position the hood latch aside.
-
To install, tighten to 12 Nm (9 lb-ft).
3. Remove the screw and disconnect the hood latch release handle and cable.
4. Remove the hood latch.
5. To install, reverse the removal procedure.
-
Lower the hood to check the hood latch alignment.
