E 350 V10-6.8L VIN S (2006)
6. On a rear safety belt retractor and tongue without a flip-up shoulder safety belt guide cover, remove the shoulder safety belt guide.
1
Position the shoulder safety belt cover aside.
2
Use the Safety Belt Bolt Torx Bit to remove the bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
3
Remove the shoulder safety belt guide.
7. If equipped, remove the screw and the overhead console.
-
Disconnect the electrical connectors.
Rear
8. If equipped, remove the screws and the video display.
-
Disconnect the electrical connectors.
Front and Rear
