E 350 V10-6.8L VIN S (2006)
2
Remove the pushpins.
3
Remove the lower rear body trim panel.
13. Remove the lower front body side trim panel.
1
Remove the 6 screws.
2
Lift the lower front trim panel slightly upward and remove the panel from the body side.
14. NOTE:
-
Replace any metal clips to the quarter trim panel before installing.
-
To install the upper front body side trim panel, start at the front lower corner, then work along the lower edge to the pillar.
-
To install the upper rear body side trim panel, start at the front lower portion and work up the pillars.
To install, reverse the removal procedure.
