E 350 V10-6.8L VIN S (2006)
5. Remove the backrest foam pad from the backrest frame.
6. Remove the plastic insulator.
7. Remove the manual lumbar assembly.
1. Remove the 2 tie straps.
2. Push the bottom of the lumbar assembly to the right and release the retainers.
3. Spread the wires at the top and release the lumbar assembly.
4. Route out the cable and remove the lumbar assembly.
8. WARNING: Use care when the seat back frame is removed and when releasing the recliners from a backrest upright position. The recliners are
spring-loaded, which may cause the recliner upper arms to fold with significant speed/force. Failure to follow this instruction may result in serious
