E 350 V10-6.8L VIN S (2006)
Remove the brake hose flow bolt and position the brake hose aside.
^
Discard the copper washers.
^
To install, tighten to 35 Nm (26 ft. lbs.).
3. CAUTION: Do not pry in the caliper sight hole to retract the pistons as this can damage the pistons and boots.
Remove the 2 brake caliper pin bolts and the brake caliper.
^
To install, tighten to 36 Nm (27 ft. lbs.).
4. To install, reverse the removal procedure.
^
Bleed the brake caliper.
