E 350 V10-6.8L VIN S (2006)
Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module
Anti-Lock Brake System (ABS) Module
NOTE: Standard ABS shown, traction control stability assist similar.
Removal and Installation
1. Disconnect the battery ground. For additional information, refer to Battery.
2. Remove the 3 bolts and position the degas bottle aside.
^
To install, tighten to 10 Nm (89 inch lbs.).
3. Remove the 4 screws and position the ABS module to gain access to the electrical connector.
^
To install, tighten to 5 Nm (44 inch lbs.).
4. Disconnect the ABS module electrical connector.
^
Release the lock tab.
^
Pull the connector from the module.
