ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Fluid Level Sensor/Switch|Locations > < ABS/TCS - RSC Indicator Lamp ON/DTC C1446 Set
Page 1
background image

Brake Fluid Level Sensor/Switch: All Technical Service Bulletins
ABS/TCS - RSC Indicator Lamp ON/DTC C1446 Set

TSB 06-20-6

10/16/06

ROLL STABILITY CONTROL (RSC) BRAKE OR RSC 
INDICATOR LIGHT ON WITH DTC C1446

FORD:
2006 E-350

ISSUE
Some 2006 E-350 vehicles may exhibit Roll Stability Control (RSC) Brake or RSC indicator light on with diagnostic trouble code (DTC) Cl446.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

1.

Follow normal diagnostic procedures in the Workshop Manual (WSM), Section 206-09 for DTC C1446. If the concern is still unresolved,
continue on to Step 2.

2.

Check the operation of the brake fluid level switch by following WSM, Section 206-09 Anti-Lock Control - Traction Control and Stability Assist
Step "S3".

3.

Replace the fluid level switch only if directed by WSM pinpoint test.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage

OPERATION

DESCRIPTION

TIME

062006A

2006 Econoline E-350:

0.5 Hr.

Check Diagnostic Trouble
Codes, And Replace The
Brake Fluid Level Switch
(Do Not Use With 12651D)

MT062006

Claim Additional Labor

Actual

Required As Actual Time

Time

DEALER CODING

CONDITION

BASIC PART NO.

CODE

2C251

42

Disclaimer

Brake Fluid Level Sensor/Switch|Locations > < ABS/TCS - RSC Indicator Lamp ON/DTC C1446 Set