E 350 V10-6.8L VIN S (2006)
9. Position back the RH fuel charging wiring harness and install the stud bolts.
^
Tighten to 10 Nm (89 inch lbs.).
10. Position back the transmission fluid level indicator tube and install the retaining nut.
^
Tighten to 10 Nm (89 inch lbs.).
11. Install the transmission fluid indicator and tube nut.
^
Tighten to 28 Nm (21 ft. lbs.).
12. Connect the 10 ignition coil electrical connectors.