E 350 V10-6.8L VIN S (2006)
Transmission Position Switch/Sensor: Service and Repair
Torqshift - Automatic Transmission
Digital Transmission Range (TR) Sensor
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the shift cable end and position it aside.
3. Remove the transmission fluid pan, gasket and filter.
4. Disconnect the transmission range sensor electrical connector.
5. NOTE: The pin should be driven up through the manual valve.
Remove and discard the manual valve detent lever shaft retaining pin and discard.