E 350 V10-6.8L VIN S (2006)
4. Press down and rotate the fuel pressure sensor counterclockwise and remove from the fuel tank.
All fuel tanks
5. To install, reverse the removal procedure.
-
Carry out the evaporative emission system leak test. See: Powertrain Management/Emission Control Systems/Evaporative Emissions
System/Testing and Inspection/Evaporative Emission System Leak Test
-
Carry out the evaporative emission repair verification drive cycle. See: Powertrain Management/Emission Control Systems/Evaporative
Emissions System/Testing and Inspection/Evaporative Emission Repair Verification Drive Cycle