E 350 V10-6.8L VIN S (2006)
3. Lift the reservoir out of the reservoir bracket.
Vehicles with (6.0L). engine
4. Remove the 3 power steering reservoir bolts from the bracket.
5. Remove the 4 power steering reservoir bracket bolts and remove the bracket.
^
To install, tighten to 28 Nm (21 ft. lbs.).
All vehicles
6. Compress the clamps and disconnect the power steering return hose and the power steering reservoir pump hose from the reservoir.
7. Remove the power steering reservoir.
8. To install, reverse the removal procedure.
^
Fill and leak check the system.