E 350 V10-6.8L VIN S (2006)
7. Inspect the bearing races and rollers for pitting, galling or erratic wear patterns. Check the rollers for end wear. Discard the bearings, if necessary.
1
A typical new bearing roller.
2
A worn bearing roller.
Installation
1. Using the special tools 205-098, 205-100 and 205-278, install the inner and outer bearing cups.
^
Check to see if a 0.038 mm (0.0015 inch) feeler gauge can be inserted between the cups and the rear hub at any point around each cup. Reseat
the bearing cups, if necessary.
2. Install the inner rear wheel bearing in the rear hub.
3. Install a new rear hub seal.
^
Use a suitable seal installer.
