E 350 V10-6.8L VIN S (2006)
4. Clean a section of the transmission fluid pan and install the sticker.
5. Fill the transmission with clean automatic transmission fluid.
^
Verify for correct operation.
^
Check the filter for leaks.
Fluid Pan, Gasket and Filter
Fluid Pan, Gasket and Filter
Material
Removal
CAUTION: Do not use any supplemental transmission fluid additives or cleaning agents. The use of these products could cause internal transmission
components to fail; this will effect the operation of the transmission.
Use of a fluid other than specified could result in transmission failure.
NOTE: Normal maintenance requires periodic automatic transmission fluid changes. If a major repair, such as a clutch, band, bearing, etc., is
required, the automatic transmission will need to be removed for repair. The transmission fluid needs to be changed if evidence of fluid contamination
is found.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain transmission fluid.
^
Loosen the transmission fluid pan bolts and allow fluid to drain. After fluid is drained, remove the bolts.
