E 350 V10-6.8L VIN S (2006)
1. Connect the inlet and outlet hoses to the auxiliary fluid cooler.
2. Connect the fluid cooler hoses to the radiator.
3. Install the remote mount transmission fluid filter bracket.
^
Tighten to 25 Nm (18 ft. lbs.).
4. Install the fluid cooler tubes, the fluid cooler tube bracket and the fluid cooler tube bracket nut.
^
Tighten to 12 Nm (9 ft. lbs.).
5. Connect the transmission cooler inlet and outlet lines to the remote mount fluid filter housing.
