E 350 V10-6.8L VIN S (2006)
7. NOTE: Inspect the shift solenoid O-rings and TCC solenoid O-rings for damage.
Install the shift solenoid.
1
Position the TCC solenoid.
2
Position the shift solenoid.
3
Install the bolt.
Main Control Valve Body
Main Control Valve Body
Special Tool(s)
Removal
CAUTION: Do not pull on the molded lead frame. This may cause damage to the connector ends. Carefully pry up on the locking tabs to disconnect
the solenoids. Disconnect the molded lead frame from the solenoids.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Loosen, but do not remove the transmission fluid pan bolts and allow the fluid to drain. Once the fluid has drained, remove the bolts.
