E 350 V8-4.6L SOHC VIN W (2005)
1. Thoroughly clean and inspect the front wheel bearings and the brake disc and hub.
2. Lubricate the front wheel bearings.
3. Install a new wheel hub grease seal.
1
Install the inner front wheel bearing.
2
Install a new wheel hub grease seal.
4. Install the brake disc and hub.
1
Position the brake disc and hub.
2
Install the outer front wheel bearing.
3
Install the front wheel outer bearing retainer washer.
4
Install the spindle nut.
5. While rotating the brake disc and hub, tighten the spindle nut.
6. Loosen the spindle nut two turns.