E 350 V8-4.6L SOHC VIN W (2005)
Brake Master Cylinder: Service and Repair
Brake Master Cylinder - Hydro-Boost(R)
BRAKE MASTER CYLINDER - HYDRO-BOOST(R)
Removal and Installation
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake
fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water
and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
All vehicles
1. Disconnect the battery.
2. Use a suitable suction device to remove the brake fluid from the brake master cylinder reservoir.
3. Remove the coolant reservoir bolts and position the reservoir aside.
Diesel engine
4. Disconnect the coolant hoses from the air cleaner outlet tube.
5. Loosen the clamp and disconnect the air cleaner outlet tube.
