E 350 V8-4.6L SOHC VIN W (2005)
6. Remove the RH turbocharger inlet pipe bolts.
7. NOTE: There is a metal gasket between the exhaust inlet pipe and the Exhaust Gas Recirculation (EGR) cooler.
Remove the exhaust inlet pipe-to-EGR cooler clamp.
8. Remove the turbocharger inlet clamp.
9. Carefully remove the turbocharger inlet pipe assembly from the vehicle.
Installation
1. NOTE: When installing the turbocharger inlet pipe into the vehicle, do not bend or twist the flex bellows.
Position the turbocharger inlet pipe and install the turbocharger inlet clamp.
