E 350 V8-4.6L SOHC VIN W (2005)
5. Loosen but do not remove the digital TR sensor bolts.
6. NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
7. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.
8. Install the manual control lever.
1. Position the manual control lever.
2. Install a new manual lever shaft outer nut.
