E 350 V8-4.6L SOHC VIN W (2005)
8. NOTE: Passenger seat shown.
Remove the inboard side shield screws from underneath the seat.
9. NOTE: Passenger seat shown.
Rotate the inboard side shield upward to disengage the front and center upper hooks.
-
Pull the inboard side shield away to clear the safety belt buckle pretensioner.
10. NOTE: Passenger seat shown.
Remove the inboard side shield.
1
Rotate the inboard side shield upward to release the rear pin-type retainer.
-
Install a new pin-type retainer if damaged during removal.
2
Hold the inboard side shield in one hand and release the retaining clips holding the safety belt buckle pretensioner boot to the inboard side
shield.
3
Remove the inboard side shield.
Seats without inboard side shield