E 350 V8-4.6L SOHC VIN W (2005)
4. Lower the transmission onto the rear crossmember and tighten the bolts.
5. NOTE: The output shaft and the driveshaft are a balanced assembly.
Install the driveshaft.
^
Align the index marks and position the driveshaft on the transmission.
^
Position the driveshaft to the rear differential.
6. NOTE: To maintain driveshaft balance, install the driveshaft yoke and flange in the original position that was marked during removal.
Install the driveshaft.
1. Install the driveshaft.
2. Install the bolts.
Manual Control Lever Shaft and Seal
Manual Control Lever Shaft and Seal
