E 350 V8-4.6L SOHC VIN W (2005)
Fluid - Differential: Fluid Type Specifications
Differential Fluid Type
(2) Visteon 8.8/9.75 in. conventional/Trac-Lok .......................................................................................................... SAE 75W-140 Synthetic Lubricant(3)
(2) Dana M70HD (M273HD) E-350 DSO ................................................................................................................. SAE 75W-140 Synthetic Lubricant(3)
(4) Dana M60 (M248) E-250/350 DSO ...................................................................................................................... SAE 75W-140 Synthetic Lubricant(3)
Dana Limited Slip Axles: (4)
M60 (M248) E-250/350 ............................................................................................................................................................. SAE 90 Hypoid Gear Oil(3)
M70FF (M267FF) E-350 ........................................................................................................................................................... SAE 90 Hypoid Gear Oil(3)
M70HD (M273HD) E-450 ......................................................................................................................................................... SAE 90 Hypoid Gear Oil(3)
Dana Conventional Axles:
M60 (M248) E-250/350 ............................................................................................................................... SAE 80W-90 Premium Rear Axle Lubricant(3)
M70FF (M267FF) E-350 ............................................................................................................................. SAE 80W-90 Premium Rear Axle Lubricant(3)
M70HD (M273HD) E-450 ........................................................................................................................... SAE 80W-90 Premium Rear Axle Lubricant(3)
(2) If your vehicle's rear axle is filled with a synthetic rear axle lubricant it is considered lubricated for life. These lubricants do not need to be checked or
changed unless there is a leak suspected, service is required or the axle assembly has been submerged in water. the axle lubricant should be changed any
time the rear axle has been submerged in water.
Fill 1/4 to 9/16 inch (6 mm to 14 mm) below bottom of fill hole. Add 4 oz (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford
specification EST-M2C118-A, for complete refill of 8.8 inch and 9.75 inch Traction-Lok axles.
(3) Fill Dana rear axles to 1/4 inch to 9/16 (6 mm to 14 mm) below bottom of fill hole. Fill Visteon axles 1/4 inch to 9/16 inch (6 mm to 14 mm) below
bottom of fill hole.
(4) Visteon Traction-Lok axles require 4 oz (118 ml) of Additive Friction Modifier XL-3 or equivalent. Dana limited-slip axles (E250/350/450/550)
require 8 oz (237 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C119-A.
