E 350 V8-4.6L SOHC VIN W (2005)
12. NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
Using a brass drift, remove the pinion bearing cups by tapping alternately on opposite sides of the cups.
Installation
Using special tool 205-024
1. Position the special tools and the inner and outer bearing cups in their respective bores.
1. After placing the inner and outer bearing cups in their bores, place the special tool (inner) on the inner pinion bearing cup.
2. Place the special tool (outer) on the outer pinion bearing cup.
3. Install the special tool.
2. Tighten the special tool to seat the pinion bearing cups into their bores.
Using special tools 205-153, 205-231, 205-D055 and 205-387
3. Using the special tools, drive the outer pinion bearing cup into the rear axle housing.
