E 350 V8-5.4L (2008)
11. Remove the rear safety belt tongue and retractor assemblies upper attachments.
12. Remove the sliding door upper roller hinge trim cover, if equipped with a sliding door.
1. Remove the screw.
2. Remove the upper roller hinge trim cover.
13. Open the sliding door and loosen the sliding door upper garnish moulding, if equipped with a sliding door.
14. NOTE: LH shown, RH similar.
Remove the upper quarter trim panels at the headliner.
15. Remove the rear cargo lamp.
16. Remove the rear headliner attaching pushpins.
17. Pull the headliner from underneath the door opening weatherstrips.
18. Remove the headliner from the vehicle.
19. To install, reverse the removal procedure.