E 350 V8-5.4L (2008)
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the jack stowage cover (regular wagon).
-
Lift the jack stowage cover slightly upward and pull away from the body side.
2. Remove the jack stowage cover (extended wagon).
-
Lift the jack stowage cover slightly upward and pull away from the body side.
3. Pull the rear door weatherstrip off at the rear door opening to access the trim panel rivets.
4. Remove the rear seat belt covers.
-
Pry the seat belt covers upward from the upper trim panels.
5. Remove the window latches, if equipped.
1. Remove the 2 window latch screw (1 shown).
2. Remove the window latch.
